Maintain Metal Upgrade Parts for MJX Hyper Go 1/16 RC Cars

Many RC hobbyists have misunderstandings about installing metal upgrade parts for the MJX Hyper Go 1/16 series RC cars. They think there is no need to maintain the vehicle after modification. However, without proper maintenance, metal parts are prone to rust, jamming, wear, and even shortened service life.

Here are several easy-to-follow maintenance methods.

Basic Maintenance After Every Run

Clean sand and dust. After running on sand or muddy ground, blow away sand and dirt from gaps immediately. You can use an air blower or low-pressure air compressor for cleaning. Do NOT spray with high-pressure water directly. If the parts get wet, wipe the surface with a damp cloth and dry up all standing water.

Regular In-Depth Maintenance

Perform in-depth maintenance every 5 to 10 runs. Spray a thin layer of RC model-specific anti-rust oil on exposed metal parts. Do not overspray, as excess oil will attract dust. Use model-specific grease for metal bearings and ball joints to reduce dry friction between metal components and lower abnormal noises.

Maintenance for Long-Term Storage

If the car will not be used for a period of time, clean and dry the vehicle surface, apply anti-rust treatment to metal parts, and store it in a dry and well-ventilated place. Avoid humid locations. You can release the shock preload to reduce continuous stress on metal components.

Mistakes to Avoid:

Rinsing the car directly with plenty of water after running. Water trapped inside gaps will cause rust within a few days.
Applying excessive lubricating oil. It will trap sand and dirt and accelerate metal wear.
Storing the car for a long time without cleaning. Residual salt from mud and water will corrode metal parts.

Shown below: metal upgrade parts for MJX Hyper Go 1/16 RC Car, including suspension arms, C-hubs, steering cups and other metal components. These metal parts require regular maintenance to keep great performance.

Conclusion:
The metal upgrade parts for the MJX Hyper Go 1/16 series are designed for high-intensity off-road driving. With simple cleaning and regular lubrication and anti-rust treatment, you can greatly extend the service life of parts, reduce issues such as stripped gears and rust, and keep your car running more stably.

If you want to buy Metal Upgrade Parts for MJX Hyper Go 1/16 series,please click here: MJX Hyper Go 1/16.