MJX Hyper Go 16218: Fix Noisy Gears with Proper Mesh & Lubrication

Are you often bothered by loud gear noise from your MJX Hyper Go 16218 while off-roading and don’t know how to fix it?
This guide will show you how to solve this issue.
First, adjust the gear mesh between the pinion and spur gear. Too tight or too loose mesh is the leading cause of gear chatter for many RC hobbyists. Clean sand, dirt and old grease out of the gear housing first, then apply a thin, even coat of RC-specific gear grease on the gear teeth. Never over-grease, since excess lube attracts dust and creates extra drivetrain drag. Also inspect your differential gears and bearings. Worn gear teeth or loose bearings will still cause abnormal noise even after lubrication.
These methods can effectively reduce gear noise. Go ahead and check your MJX 16218 right away!