Fix Front Wheel Toe-In and Toe-Out for MJX Hyper Go 10303 10304 10306

Many owners of the MJX Hyper Go 10303, 10304 and 10306 experience front wheel toe-in or toe-out after bashing, jumps and crashes. When the front wheels point inward or outward, the RC buggy pulls to one side and struggles to hold a straight line. Most players will adjust the steering trim on their transmitter, but this only offers temporary relief, and the issue quickly returns. Do you know why this happens, and how you can fix it?

We first need to troubleshoot the root cause of toe-in or toe-out on your MJX 10303,10304,10306.

Inspect your tires. Replace heavily worn tires, as uneven tire wear ruins straight-line performance.
Check the servo. Make sure the servo can return smoothly to center without binding.
Examine fasteners. Tighten any loose screws on the steering and suspension assembly.

If all of these components check out fine, the culprit is likely your stock plastic steering tie rod, suspension link or servo link.

Why do the stock plastic links on MJX Hyper Go 10303,10304 and 10306 cause incorrect wheel alignment?
The factory plastic links lack sufficient toughness. A hard landing or minor impact can bend these plastic rods. Even tiny, barely visible deformation will make your vehicle pull consistently left or right.

But there is no need to worry. Upgrading your stock plastic links is the solution to this problem!

These upgrade links for MJX 10303,10304,10306 maintain stable wheel geometry under impacts. They lock in proper wheel angles, eliminate left-right pulling and reduce steering slop. Your buggy will hold a steady straight line during off-road bashing and jumps.

Multiple variants are available: the heavy-duty Most Durable version, plus color options including China Red, Sky Blue and Gloss Black. You can select steering tie rods, suspension links or servo links according to your needs.