MJX Hyper Go 16213: Pre-Run Checks & Tuning Tips

When you unbox your brand-new MJX Hyper Go 16213 1/16 brushless buggy, don’t rush into bashing. Complete these simple factory inspections and pre-run tuning to prevent unexpected damage.especially if you are new to RC!
First, tighten loose wheel nuts and suspension screws. Spin the wheels by hand to make sure the drivetrain has no binding or strange grinding noise. Check shocks for oil leaks and examine the condition of steering linkages.
Next, lift the RC car up and run bench tests for steering and throttle.
Finally, adjust the steering trim so the buggy drives straight. Double-check LiPo wiring and ESC low-voltage cutoff settings, and confirm your radio signal works properly before your first outdoor run.
This quick pre-bash setup keeps your 16213 running stable and extends the lifespan of stock components.
Click here to learn more about the MJX 16213:: MJX Hyper Go 16213 RC Car.