MJX Hyper Go 10303 Metal Upgrade Parts: What to Upgrade First

Many MJX Hyper Go 10303 RC car players ask: What parts can be upgraded on the MJX 10303? Are these metal upgrade parts interchangeable?

Some beginner RC enthusiasts mistakenly think they need to metalize the entire vehicle and do not know which part to replace first. Below is our recommendation for the upgrade priority of MJX Hyper Go 10303 metal upgrade parts.

The core rule for upgrades: Replace high-stress parts that break easily on impact first. Add protective parts and optimize handling based on your driving style. Full metal conversion in one go is NOT recommended.

• For frequent jumping and bashing: Front and  Rear Lower Suspension Arms > Front Steering Knuckle ,Front C-Hub > Front an Rear Suspension Hangers

The stock lower swing arms of the MJX Hyper Go 10303 are the weakest point on the vehicle. They are prone to breaking during landings after jumps or crashes. Upgrading to metal lower suspension arms improves impact resistance. The Front Steering Knuckle and Front C-hub bear the load of front-wheel steering and landing shocks, and they tend to crack in collisions. Front and Rear Suspension Hangers act as mounting pivots for the lower suspension arms and can deform or tear under aggressive driving.

• For driving on gravel and rough dirt tracks: Chassis Armor

The metal chassis Armor for the MJX 10303 protects the main chassis from scratches and dents caused by rocks and hard protrusions. This is a protective upgrade.

• For tighter steering and reduced slop: Front Steering Assembly

Upgrading the Front Steering Assembly of the MJX Hyper Go 10303 cuts down steering slop and delivers sharper, more precise steering response, ideal for players seeking refined handling.

• To protect the drivetrain: Front and Rear Gearbox Covers, Rear Cup

The metal Gearbox Covers for MJX 10303 safeguard the internal gears and differential, lowering the risk of gearbox housing cracking upon impact. The metal Rear Cup carrier reinforces the mounting position of the rear wheel bearings and reduces slop in the rear drivetrain, strengthening the transmission system.

Are these MJX Hyper Go 10303 metal upgrade parts interchangeable?

This set of metal upgrades fits the MJX 10303 and 10304. These two models share identical chassis hole layouts. The metal parts are interchangeable, plug-and-play with no sanding required.

They are NOT compatible with models such as the 10306 or the 1/16 series. Always double-check your model number before ordering!

Summary:
When selecting priority upgrades, players should choose based on personal needs and preferences. Remember, avoid installing all metal parts at once, and confirm compatibility when shopping.

If you want to buy MJX Hyper Go 10303 metal upgrade parts,please  click here: MJX Hyper Go 10303 Parts.