MJX Hyper Go 7304 Upgrade Parts Fender Flare Mount

Product Introduction:

• Product Name: Fender Flare Mount;
• Applicable Brands: MJX Hyper Go;
• Applicable models: 7304;
• Product Version: Upgrade;
• Product Material: TPU;
• Product Colors: as pictures shown;
• Factory instructions: Screws are included;

Package Included:

1x Fender Flare Mount

A link below includes body armor. If you want to purchase it, click the link below for details.

Buy: Body Armor

MJX Hyper Go 7304 Upgrade Parts Fender Flare Mount:

MJX Hyper G 7304 Dedicated Wheel Arch Liner, non-destructive installation, does not affect steering, allows normal opening and closing of the body shell.
Newly designed for installation without removing the reinforcement bar. Features a TPU bracket and PLA sand guard plate combination, ensuring part strength and extending service life.

Unlike the 7303, the 7304 has limited front body space. A new structure is used for strength, different from standard rear inner liners.Together with the chassis middle anti-dust plate, it blocks most sand and gravel.

The rear section is cut out to make space for the rear light housing.

The rear inner TPU mount is equipped with a reinforced base to reduce vibration during driving and improve stability.

First remove the stock screws in the front and rear mounting holes, then use 20mm button-head screws to install the TPU mounts to the chassis.

Rear fender flare mount-mind the installation direction!

Front fender flare mount-mind the installation direction！

Use 12mm button-head screws to install the rear mount bracket, secure the front mount connection, and fit the middle anti-dust plate.

Refer to the photo for the anti-dust plate installation position. The front bracket connection needs to be secured with screws and nuts.

Finally, install the inner liner onto the bracket.

Secure with 16mm button-head screws; add nuts to the circled screws.

Secure with 16mm flat-head screws and nuts. Note that the nuts should be on the bracket side!

Notice:

Please check the size and Product Number carefully before place order. Do not ask for refund or leave negative feedback to us by your wrong choice.

Overview:

MJX Hyper Go 7304 rc car features a 120A sensorless brushless ESC and a 3974 2500KV brushless motor, with synchronised headlights across the entire chassis, allowing it to race freely through the night.

Safety Instructions:

• The products contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other products, below Age 3 should played with Parents together.
• The color of products finalized by real object, Dimensions are manual measurement, there may be 2-3mm error.
• About the sample order, We send every items in good, A little bit bending cause by transportation is limited, will not effect to your items.
• Above information just for noted to bring you a better shopping experience, any question or requirement please contact with me, we will reply as soon as possible.

------------------------------

1, Coupons

2, After-sales Service